C-COR Optiworx HW Series, Руководство по процедурам, Страница: 15 / 36

PN 060914-000
Revision C, October 2001
Page 2-1
© 2001, C-COR.net Corporation
SECTION 2
INSTALLATION
Content Page
1. GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2. HOW TO USE THIS SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
3. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
INSTALLATION TASK INDEX LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
TOP PROCEDURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
1. GENERAL
1.01 This section presents the procedures for unpacking and installing the Integrated Fan/Power
Supply assembly in a rack or cabinet; attaching the assembly to office ground; wiring the
assembly’s -48 VDC output(s) to an HWX Equipment Shelf (HX1281EC or HX2281EC); performing
initial turn-up and test of the assembly.
2. HOW TO USE THIS SECTION
2.01 The procedures in this section are written in the Task Oriented Practice (TOP) format.
TOP procedures are step-by-step instructions for completing indicated tasks. To find instructions
for installing the HWX Integrated Fan/Power Supply, proceed as follows:
1. Find the task to be performed in the Installation Task Index List (IXL-001).
2. Locate the procedure for the task. Each procedure in this manual is one of the following
types:
a) Non Trouble clearing Procedure (NTP) - Directive level procedure listing normal
work items to be performed.
b) Detail Level Procedure (DLP) - Detailed step-by-step instructions.
3. Perform all the items in the NTP in the order listed unless you are sent to another NTP.
When you finish an NTP, you have completed the task. For more detailed information,
you may be referred from the NTP to a detailed level procedure (DLP-xxx). Detail
Level Procedures may also direct you to other Detail Level Procedures.
Note: If one NTP sends you to another, in most cases you need not return to the first
NTP after finishing the second.
Note: When you complete a DLP, return to the procedure which sent you to the just-
completed DLP.