background image

 

25 

15. Service 

The device does not require any routine servicing. 

  If you notice any unexplained changes in the performance of the device, if 

it is making unusual or harsh sounds, if it has been dropped or mishandled, if 
the enclosure is broken, or if water has entered the enclosure, you must 
discontinue use and contact your home healthcare provider.   

  If the device malfunctions, contact your home healthcare provider 

immediately. Never attempt to open the enclosure of the device. Repairs and 
adjustments must only be performed by service personnel that have been 
authorized by BEYOND Medical. Unauthorized service could cause injury, 
invalidate the warranty, and/or result in costly damage.   

  If necessary, contact your local authorized dealer or BEYOND Medical for 

technical support and documents.   

 

16. Technical Support 

Please contact BEYOND Medical directly if you need the circuit diagram of the 
device or the list of components for certain purposes (such as, maintenance or 
connection to other equipment). BEYOND Medical will provide the circuit diagram 
and/or other technical documents in whole or in part according to your needs.   

 

17. Disposal 

When the device reaches the end of its service life, please dispose of the device and its 
packaging in accordance with local laws and regulations. 

 

18. Warranty 

From the date of purchase, the manufacturer provides a one-year limited warranty for 
the host unit and a 3-month limited warranty for the tubing, mask and humidifier. 
This limited warranty is only available to the initial consumer. It is not transferable.   
For one year (or 3-month) from the original date of purchase, BEYOND Medical will 
repair or replace any parts of this appliance that prove to be defective in materials or 
workmanship when such appliance is installed, used and maintained in accordance 
with the provided instructions.   

Exclusions

             

This warranty does not cover:   

1.

 

Product with original serial numbers that have been removed, 

altered or cannot be readily determined;   
2.

 

Any damage caused as a result of improper use, abuse, excessive 

usage, modification or alteration of the device; 
3.

 

Repairs carried out by any service organization that has not been 

expressly authorized by BEYOND Medical to perform such repairs; 
4.

 

Any damage or contamination due to cigarette, pipe, cigar or other 

smoke;   
5.

 

Any damage caused by exposure to ozone, activated oxygen or 

other gases;   
6.

 

Any damage or contamination due to insect infestation; and   

7.

 

Any damages caused by external causes such as accidents, fires, or 

acts of God.   

Содержание ResPlus C-20A CPAP


































Отзывы: