BYD ECB16S-B, Руководство оператора

Страница: 26 / 43

TRANSPORTATION AND STORAGE
ECB16S-B/ECB18S-B 50
ECB16S-B/ECB18S-B
51 OM-ECB16/18S-B2019001-EN
DAILY MAINTENANCE
Period and Items
Daily (or every 8 hours) and weekly (or every 40 hours) for daily inspection items, whichever
comes first. If the forklift works less than 8 hours per day, conduct the inspection and checks on
a daily basis. if daily working hours exceed 8 hours, conduct the inspection and checks every 8
hours.
Inspection checklist:
No. Item
1 day 1 week
8 hours 40 hours
1 Exterior Check
2 Wheel Clean and tighten Clean and tighten
3 Mast Check
4 Hydraulic System Check
5 Seat Check
6 Display Check
7 Warning Equipments Check
8 Brake Check Check
9 Travel, Steering and Control Check
10 Electric System Check
11 Counterweight Check
12 Clean Clean
13 Others Check
Note
(1) Check before operating the forklift.
(2) Before conducting the daily inspection, recheck for any fault and fault found earlier.
Content Description
1. Exterior
(1) Check the forklift body for damage and deformation.
(2) Check the floor where the forklift is parked for oil leakage.
(3) Check whether nameplate, loading capacity chart and waring decals and signs are
complete.
Note
If oil leakage occurs, confirm the location of the oil leakage and contact the BYD after sales
service.
2. Wheel
(1) Check on a daily basis if the wheel fasteners are secured or loose. Fasten them if they
are loose.
(2) Take out debris embedded in the tire.
(3) If the four tires are unevenly worn, or the tires are found damaged, or the rims are bent,
then replace the tires.
3. Mast
(1) Check the cylinders, oil pipes, and hoses for oil leakage.
(2) Check the working equipment for deformation and damage. Check if the bolts are securely
fastened.
Note
If oil leakage occurs, confirm the location of the oil leakage and contact the BYD after sales
service.
4. Hydraulic System
(1) Check the hydraulic oil level in the oil tank.
(2) Check the state of the filter indicator.
5. Seat
(1) Pull the seat belt fully out and check for fraying.
(2) Check the locking device (belt buckle) of the seat belt, and check if the retractor functions
properly.
(3) Check if the seat can be adjusted forward and backward, and if the back rest angle and
seat suspension can be adjusted.
Danger
In the case of seat belt failure, stop operating the forklift and replace the seat belt.
6. Display
(1) Check if the battery voltage and status of charger displayed are correct.
(2) Check if any error/fault indication appears on the display.
(3) Set the direction control switch to the
“
FORWARD
”
,
“
STOP
”
, and
“
REVERSE
”
positions respectively, to see whether the corresponding symbols appear on the display.
(4) Check if the turning indicator signs appear when the turning indicator is activated.
(5) Check if the 3 control buttons on the display functions properly.