BYD ECB16S-B, Руководство оператора

Страница: 20 / 43

OPERATING
ECB16S-B/ECB18S-B 38
ECB16S-B/ECB18S-B
39 OM-ECB16/18S-B2019001-EN
Adjusting Spacing between Forks
Pull out the locating pin of the fork. Move the fork to the desired spacing.
Caution
The two forks shall have the equal distance to the forklift center line.
Tow Pin
Pull up the tow pin, insert the tiller of the trailer and insert the tow pin through the tiller.
Caution
(1) The tow pin can only be used for towing light duty trailers within the factory.
(2) Before towing the load, check that the route is clean and flat and your vision is not
obstructed.
2.Double-rocker armrest
No. Name Descriptions
1 Horn button Press down horn button, horn works and send out audible warning.
2 Gear switch Used for the forklift to travel forward, stop, or travel backward.
3 1st Control handle for lift and tilt Press the 1st Joystick leftward to lift, rightward to lower; Press the joystick forward to
tilt forward, backward to tilt backward.
4
2nd Control handle for Side shift
and 4th function
3rd hydraulic function is generally used to control the side shifter. Press the joystick
leftward to shift leftward, press the joystick rightward to shift rightward; The 4th function
depends on the attachment in use.
5 Emergency disconnect switch
Press down the emergency disconnect switch to shut off the power. Rotate and pull up
it to resume the power.
6 Front-rear position adjusting switch Adjusts the front-rear position of the multi-function armrest.
7 Up-down position adjusting switch Adjusts the up-down position of the multi-function armrest.
1
7
6
3 4
2 5