Safety instructions
22
V-LOAD Cutter Megastar silage block cutter
Installing / removing the accessory equipment
Mount the accessory equipment only to suitable tractors!
Mount the accessory equipment properly to the designated
fixtures!
When mounting the accessory equipment at the front and / or the
rear of a tractor, do not exceed any of the following values:
the permissible gross weight of the tractor,
the permissible axle loads of the tractor,
the permissible drawbar load on the coupling point of the
tractor,
the permissible load capacity of the tractor tires!
Before installing / removing the accessory equipment, switch off
the tractor and secure it from starting up and rolling away
inadvertently!
No one is allowed between the tractor and the accessory
equipment while the tractor is moved up to the accessory
equipment!
Any assistants present may only help the driver steer the tractor
while standing next to the vehicles.
No one is allowed between tractor and accessory equipment
while the three-point hydraulic system is being actuated!
Check all coupled supply lines.
Coupled supply lines:
must easily yield without tension, kinking or friction when
the vehicles negotiate curves,
must not rub against / be in contact with foreign objects!
Always set down the uncoupled accessory equipment on a level
and horizontal surface and ensure it is stable!
For this purpose, the cutting bar must be moved to its
bottommost position.