Büttner Elektronik Batterie-Control-Booster, Инструкция по установке и эксплуатации

Страница: 3 / 36

BÜTTNER ELEKTRONIK – Batterie-Control-Booster MT BCB 30/30, MT BCB 40/40, MT BCB 60/40
EN
3
Table of Contents
Introduction 2
Scope of delivery 2
1. General-/Safety-information 4
2. Description 5
2.1. Mains operation 5
2.2. Booster-mode 5
2.3. Pulsing-operation 5
2.4. General device properties 5
3. Installation Batterie-Control-Booster MT BCB 7
3.1. Mounting 7
3.2. Device overview 7
3.3. Operating panel 7
3.4. Types of installation 8
3.5. General installation instructions 16
3.6. Connection of – Com, + BORD, + START 16
3.7. Connections on 9-pin plug-in connector 17
4. Commissioning and function 19
4.1. Charging programs for various types of board-batteries 19
4.2. Configurations and functions 19
4.3. Control panel and display 24
4.4. Functions of the control panel push button 24
4.5. Mains charging 25
4.6. Charging while driving 25
4.7. Charge progress on the board-battery 26
4.8. Function of temperature sensor 27
4.8.1. Lead-acid-, Gel-, AGM-batteries 27
4.6.2. LiFePO
4
-batteries 28
4.9. Operating mode display and troubleshooting 29
4.9.1. Mains operation 30
4.9.2. Booster-mode 31
5. Technical Data 32
6. Warranty 34