Butterfly Amicus Expert, Руководство пользователя

Страница: 7 / 80

7
panel apply only to the selected ball. Up to 7 balls may be added to an exercise. To delete a ball,
press and hold the desired Ball Button until light goes out. To delete all balls at once, press and
hold the 1 and 7 buttons until lights go out (except #1).
3 + 4 Trajectory Buttons — Raise or lower the trajectory of the Current Ball. Pushing at the same
time, the robot will step into calibration mode.
5 + 6 Placement Buttons — Shift the Current Ball placement to the left or right. Pushing at the same
time, the deflector plate position will reset.
7 + 8 Sidespin Buttons — Shift the orientation of the sidespin to the left or right.
9 + 10 Speed Buttons — Decrease or increase the speed of the Current Ball.
11 + 12 Spin Buttons — Decrease or increase the amount of backspin or topspin.
13 + 14 Ball/Min Buttons — Decrease or increase ball frequency (Ball/Min). Frequency rate is shown
on the Display (22) from 1 to 100. Press briefly to change numbers one by one, or hold down
to change numbers quickly. Pressing both buttons at the same time activates AFC (Automatic
Frequency Control) and AFC is shown on the display.
15 Start/Stop & Sample Button — Press briefly to start or stop ball delivery. Hold down to throw
samples of Current Ball until released.
16 Cycle Button — Press briefly to activate the Cycle function. Press for 2 seconds to program
the Cycle function. See page 15 for more details.
17 Random Button — Press once to select Random Scatter, press a second time to select Ran-
dom Place, and press a third time to select Random S Place. Press a 4th time to exit.
18 + 19 Step Buttons — Use to enter Memory Mode and select the Memory Position (E01–99). Pressing
both at the same time exits Memory Mode. Also used for programming the Cycle function (see
page 15).
20 Save Button — Saves an Exercise into memory in the position shown on the Display (22). An
empty memory position (indicated by a flashing E_ _) must be selected using buttons 18 & 19.
Hold down the Save button until E_ _ stops flashing.
21 Clear Button — Clears a Memory Position. A saved Exercise must be shown on the display (solid
E_ _). Hold down the Clear button until the display starts flashing.
22 Display — Shows various information (see 9, 10, 12, 13, 15, 16, 17, 21).
Also shows error codes (Er_).