Instruction manual
SPEEDLINER 8050WS - SPEEDLINER 9080WS
Code M0205 - rev.1.0
(11/2010)
BUTLER S.p.A.
BUTLER Engineering & Marketing S.p.A. a s.u. -
Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy)
Page 39/51
Tel. +39 0522 647911, Fax +39 0522 649760
e-mail: [email protected] / www.butler.it
DETECTOR
KEYPAD
PC KEYBOARD
DESCRIPTION
It goes back to “vehicle data
entry” phase of Figure 47
It allows selecting a printer
different from the pre-set one
It sends print report to printer
It allows defining colours on the
printout of out-of-tolerance data
(Red to highlight them or Black
NOT to highlight them)
A report on the performed test is printed with customer data, vehicle data before and after
adjustment, vehicle technical specifications supplied by manufacturer, and any other remarks for
the customer.
To access the data contained inside customer database, press F3
from the start page (see
Figure 20)
Legend of the printout example shown in the previous page (Figure 49).
1 -
BUTLER logo of the manufacturer
2 -
Space dedicated to workshop data customisation
3 -
Test date and time
4 -
Vehicle being tested and vehicle owner data
5 -
Vehicle being tested manufacturing data
6 -
Vehicle being tested diagnosis data
7 -
Vehicle being tested data after adjustment
8 -
Front axle data table
9 -
Rear axle data table
10 - Space devoted to manual remarks
