Instruction manual
SPEEDLINER 8050WS - SPEEDLINER 9080WS
Code M0205 - rev.1.0
(11/2010)
BUTLER S.p.A.
Page 30/51
BUTLER Engineering & Marketing S.p.A. a s.u. -
Via Balduina 5/7 - 42010 Rio Saliceto (RE - Italy)
Tel. +39 0522 647911, Fax +39 0522 649760
e-mail: [email protected] / www.butler.it
Figure 35
Move vehicle forward again, until vehicle arrow matches target point (final point). “STOP” will
be displayed for approx. three seconds, and measurement readings acquired. The thrust
Run-Out procedure has been completed.
Figure 36
Should you be willing to repeat the operation once the programme has already entered a
following phase, you can go back to this page by pressing F1, and repeat the above
procedure. Once the Run-Out procedure has been completed, programme will automatically
go to the next phase.
Vehicle thrust
direction
Vehicle
matches target
point
Vehicle target
point