![background image](http://html.mh-extra.com/html/bushranger/l2600/l2600_operators-manual_2835573005.webp)
5
SAFETY RULES AND PRECAUTIONS
Proper safety precautions must be observed.
Like all power equipment this unit must
be handled carefully.
DO NOT EXPOSE
YOURSELF OR OTHERS TO DANGER
.
Follow these general rules. Do not permit others
to use this machine unless they are thoroughly
responsible and have read, and understand the
machine manual and are trained in its operation.
• Always wear safety goggles for eye
protection. Dress properly, do not wear
loose clothing or jewelry that could become
caught in moving parts of the unit. Safe,
sturdy, nonskid footwear should always be
worn. Long hair should be tied back. It is
recommended that legs and feet be covered
to protect from flying debris during operation
• Inspect the entire machine for loose parts
(nuts, bolts, screws, etc.) and any damage.
Repair or replace as necessary before using
the machine.
• DO NOT USE any attachment with
this power head other than the ones
recommended by our company. Serious
injury to the operator or bystanders could
result as well as damage to the machine.
• Keep the handles free from oil and fuel
• Always use proper handles and shoulder
strap when cutting.
• Do not smoke while mixing fuel or filling tank
• Do not mix fuel in an enclosed room or near
open flames. Assure adequate ventilation
• Always mix and store the fuel in a properly
marked container that is approved by local
codes and ordinances for such usage.
• Never remove the fuel tank cap while the
engine is running.
• Never start or run the engine inside a closed
room or building. Fumes from the exhaust
contain dangerous carbon monoxide
• Never attempt to make engine adjustments
while the unit is running and strapped to the
operator. Always make engine adjustments
with the unit resting on a flat, clear surface
• Do not use the unit if it is damaged or poorly
adjusted. Never remove the machine’s guard.
Serious injury to the operator or bystanders
could result as well as damage to the
machine.
• Inspect the area to be cut and remove all
debris that could become entangled in the
nylon cutting head. Also remove any objects
that the unit may throw during cutting.
• Keep children away. Onlookers should be kept
at a safe distance from the work area, at least
15 metres (50 feet)
• Never leave the machine unattended.
• Do not use this unit for any job other than
those for which it is intended as described in
this manual.
• Do not overreach. Keep proper footing and
balance at all times. Do not run the unit while
standing on a ladder or on any other unstable
footing location.
• Keep hands and feet clear of the nylon cutting
head while unit is in use.
• Do not use this type of machine for sweeping
away debris.
• Do not use the unit when you are tired, ill or
under the influence of medication, drugs or
alcohol.
• Use nylon cutting head which is free of
damage. If a stone or any other obstacle is hit,
stop the engine and check the nylon cutting
head. A broken or unbalanced nylon cutting
head must never be used.
Содержание L2600
