6
• Do not store in a closed area where fuel
vapors can reach an open flame from hot
water heaters, heaters, furnaces, etc. Store
in a locked, well ventilated area only.
• To ensure safe and proper performance
of your product. Spare parts are available
from your dealer. The use of any other
accessories or attachments may cause
a potential hazard or injury to the user,
damage to the machine and void this
warranty.
• Clean the machine completely, especially,
the fuel tank, its surroundings, and the air
cleaner.
• When refueling, be sure to stop the engine
and confirm that it is cooled down. Never
refuel when the engine is running or hot.
When gasoline spills, be sure to wipe it up
completely and properly dispose of those
materials before starting the engine.
• Stay clear of other workers or bystanders by
at least 15 meters / 50 feet.
• When ever approaching an operator of
the machine, carefully get the attention of
the person/s around and confirm that the
operator stops the engine. Be careful not
to startle or distract the operator which can
cause an unsafe situation.
• Never touch the nylon cutting head when
ever the engine is running. If it is necessary
to adjust the protector or nylon cutting head,
be sure to stop the engine and confirm that
the nylon cutting head has stopped running
• The engine should be turned off when the
machine is moved between work areas.
• Be careful not to hit the nylon cutting head
against stones, or the ground. Unreasonable
rough operation will shorten the life of
the machine as well as create an unsafe
environment for yourself and those around
you.
• Pay attention to loosening and overheating
of parts. If there is any abnormality of the
machine, stop operation immediately and
check the machine carefully. If necessary,
have the machine serviced by a authorized
dealer. Never continue to operate a machine
which may be malfunctioning.
• In start-up or during operation of the engine,
never touch hot parts such as the muffler, the
high voltage wire or the spark plug.
• After the engine has stopped, the muffler
is still hot. Never place the machine in any
places where there are flammable materials
(dry grass, etc.), combustible gases or
combustible liquids.
• Pay special attention to operation in the rain
or just after the rain as the ground may be
slippery.
• If you slip or fall to the ground or into a hole,
release the throttle lever immediately.
• Be careful not to drop the machine or hit it
against obstacles.
• Before proceeding to adjust or repair the
machine, be sure to stop the engine and
detach the spark plug cap from the spark plug.
• When the machine is placed in storage for a
long time, drain fuel from the fuel tank and
carburetor, clean the parts, move the machine
to a safe place and confirm that the engine is
cooled down.
• Make periodic inspections to assure safe and
efficient operation. For a thorough inspection
of your machine, please contact your
Bushranger™ dealer.
• Keep the machine away from fire or sparks.
It is believed that a condition called Raynaud’s
phenomenon, which affects the fingers of certain
individuals may be brought about by exposure
to vibration and cold. Exposure to vibration and
cold may cause tingling and burning sensations
followed by loss of color and numbness in the
fingers. The following precautions are strongly
recommended because the minimum exposure
which might trigger the ailment is unknown.
Muffler
Starter
Содержание L2600
