6.
Turn on the 12V water pump to allow
water to flow through the shower unit.
Note:
You should hear a series of clicks
and then the burner should ignite. The
burner flame can be seen operating
through the ‘viewing window’ located
at the front of the appliance.
7.
Turn the shower rose switch to the
ON
position and water should flow.
8.
Adjust the temperature of the
water flowing from the shower rose by
turning the ‘temperature control’ and
‘water flow’ knobs.
Note 1:
If the unit does not start/water does not flow, check the troubleshooting
guide on page 18.
| Gas Hot Water Shower
Page 15
Содержание CSG010
Страница 1: ...CSG010 ...
