![background image](http://html.mh-extra.com/html/bushranger/csg010/csg010_owners-manual_2835567013.webp)
6.
Attach the water inlet hose to the
water inlet via the crimped swivel fitting,
tighten by hand.
CAUTION
TAKE CARE Do not to over
tighten as this could break or crack the
inlet pipe.
9.
Attach the shower rose to the flexible
shower hose using the conical end
fitting.
Hand tighten only.
Do not over tighten.
7.
Connect the free end of the black
water hose to the outlet side of the water
pump & tighten using a hose clamp.
Attach the second black hose to the
inlet side of the pump & tighten using a
hose clamp.
See Page
11 for more details.
8.
Fit the clear rubber seals to both ends
of the chrome flexible shower hose. Then
attach hexagonal end to the ‘water out’
connection (center connection) on the
unit.
Do not over tighten.
Insert clear rubber washers
5.
Locate the black water inlet hose
(with silver fitting)
.
Insert the black rubber
washer into this crimped swivel fitting.
Insert black rubber washer
water
IN
(Water source
this side)
water
OUT
(Shower
this side)
| Gas Hot Water Shower
Page 10
Содержание CSG010
Страница 1: ...CSG010 ...