BUSCH COBRA BC 0101 G, Инструкция по эксплуатации

Страница: 8 / 24

l Put the label or warning board “Maintenance processing” on or
next to the pump
Safety Lockout procedure
l
Take off the label or warning board “Maintenance processing”
l Check the oil level according to the chapters “Checking the oil
level”
l Switch on the customer’s power supply
l Switch on the water quick connections (outlet first, then inlet)
l Start the pump with the remote control (press on START button) or
with the Start/ Stop button
Transport
The COBRA BC vacuum pumps are tested and checked in our factory
before careful packing. Check the packaging for transport damage
when the goods arrive. The pump can withstand temperatures
between -25°C and +55°C during transport.
Transport in packed state
Packed on a pallet, the vacuum pump can be moved with a hand
forklift truck.
Transport in unpacked state
CAUTION
Do not work, walk or stand under suspended loads.
CAUTION
Please check out the weight of the vacuum pump before lifting it up
(see “Technical Data”).
Use adequate lifting gear for this.
NOTE : The suspension eyes are located at about the centre-of-gravity
of the vacuum pump. If the vacuum pump is equipped with accessories
that could influence the centre-of-gravity, this must be taken into
account when lifting and a belt must additionally be attached to a
specific point.
l Fasten the hoist to the suspension eye on the cylinder
l Use a hoist that is equipped with a hook and safety lock
l Lift the vacuum pump
CAUTION
The vacuum pump may not be lifted anymore when it has been
filled with oil.
Moving of the vacuum pump is simple using the four wheels placed
under the vacuum pump frame.
Make sure before every transport that the oil has been drained out of
the vacuum pump.
The packaging material must be disposed of in accordance with local
and national regulations.
This handbook is contained in the delivery package.
Transport
BC 0101 G
Page 8
0870704904 (En)
47
3
23.
5
17
2
2.
5
300
340
42
520
584
300
150
Inlet
DN 50 ISO-KF
Outlet
DN 40 ISO-KF
Control Box
Cooling water outlet
Cooling water inlet
Nitrogen inlet
Power connector
IN
OUT
U range
P rated
I rated
Imax
Icu
F
Electrical
schematics
POWER CONNECTOR
C.W. OUTLET
C.W. INLET
N ©ü INLET
Tool Interface
Ethernet
PID
Oil = Busch YLC 250 B
n =
max
p = abs
Vacuum Pump
Oil quantity
m
V = max
S/N =
Year 2017
Hand pad
Start / Stop button
Warning / Alarm LED
Oil sight glass
23
Power ON LED
ON / OFF Warning / Alarm
Power
Dimensions drawing