BUSCH COBRA ATEX, Инструкция по эксплуатации

Страница: 32 / 36

11 | Troubleshooting
32 / 36 0870557375_NC2000B_VR_Ex_A0002_IM_en
The machine runs too hot. Insufficient cooling. • Make sure to comply with
the cooling liquid require-
ments, see
Cooling Liquid
Connection [ ► 13] .
Ambient temperature too
high. • Observe the permitted
ambient temperature, see
Technical Data [ ► 33] .
Temperature of the process
gases at the inlet too high. • Observe the permitted
gas inlet temperature, see
Technical Data [ ► 33] .
Oil level too low. • Top up oil.
The oil is black. Oil change intervals are too
long. • Drain the oil and fill in
new oil, see Oil Change
[ ► 26] .
The machine runs too hot. • See problem "The ma-
chine runs too hot".
For the solution of problems not mentioned in the troubleshooting chart contact your
Busch representative.