background image

20

EXPRESS WARRANTY AGAINST DEFECTS – AUSTRALIA: 

This product if imported by Point to Point Distributions Pty Ltd is warranted in Australia to be free from 

any defect in material and workmanship, subject to the following terms and conditions. 

Who provides this warranty:

 

Point to Point Distributions Pty Ltd 

 

 

 

 

Unit 9, 7-8 Len Thomas Place Narre Warren Vic, 3805. 

 

 

 

 

Tel: +61 3 8794 1800 

 

 

 

 

Email: [email protected] 

Geographical Region:

 

 

PRODUCTS PURCHASED IN AUSTRALIA 

 

 

 

 

imported by Point to Point Distributions Pty Ltd. 

Warranty Period:

  

 

2 YEARS FROM DATE OF PURCHASE 

 

 

 

 

(please retain your receipt as your proof of purchase will be  

 

 

 

 

required to valid warranty claim) 

WARRANTY CLAIM PROCESS: 

In the unfortunate event of a failure of your product, please contact Point to Point Distributions via our 

email address or phone: 

Tel: +61 3 8794 1800 

EMAIL: [email protected] 

PTP will ask you to provide evidence of your purchase receipt, to establish the warranty claim is within 

the 1 year warranty period. Failure to provide your purchase receipt will result in PTP rejecting your 

warranty claim. 

PTP  offers  an  advance  replacement  of  your  faulty  product.  Please  not  our  replacement  units  are  

a like-for-like product, and may be refurbished units that are of the exact same model and version. 

Goods presented for repair may be replaced by refurbished goods of the same type rather than being 

repaired. 

Refurbished parts may be used to repair the goods. Upon validation of your warranty claim, PTP will 

send your replacement unit, freight paid and include a pre-paid return bag for the return of the faulty 

product. If you choose do not wish to proceed with the warranty claim, you must return the replacement 

unit to us using the pre-paid return bag. Failure by the customer to return either unit within 14 days may 

incur a charge for the cost of the replacement unit. 

WARRANTY EXCLUSIONS.

 

Failure to provide a proof of purchase will result in your warranty claim being rejected. 

Product  failure  due  to  customer  misuse,  abuse  or  abnormal  use,  failure  by  the  customer  to  take 

reasonable  care,  failure  sure  to  not  using  the  product  in  accordance  with  instructions  stated  in  the 

manufacturers user guide. 

Product  failure  due  to  recommended  installation  procedures  not  being  followed  as  stated  in  the 

manufacturers guide. 

YOUR RIGHTS UNDER THE AUSTRALIAN CONSUMER LAW 

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. 

You are entitled to a replacement or refund for a major failure and for compensation for any other 

reasonable foreseeable loss or damage. You are entitled to have goods repaired or replaced if the goods 

fail to be of acceptable quality and the failure does not amount to a major failure. 

Содержание CC 9048






















Отзывы: