background image

15

 9. Playing music 

There are two ways of playing music in case of the CC 9048 hands-free car kit. 

Through A2DP (

Bluetooth

)

After the phone is connected to the hands-free car kit via 

Bluetooth

, music can be played through A2DP. 

Music player in the phone has to be turned on. Handling music playback is done with the phone (play, 
stop, pause, forward, backward). Volume adjustment can be controlled with the hands-free car kit. 

Through aux-in (cable)

Second option is music playback through AUX-In cable, used to connect phone to the hands-free car 
kit. It is activated by holding right (plus) and middle (functional) key for 4 seconds. After starting this 
option the device will read a statement on its status. Playing music mutes the car radio. Handling mu-
sic playback is controlled with the external music player (phone, mp3, tablet). To turn off AUX-In option 
hold right (plus) and middle (functional) key for 4 seconds. 

Note: 

If  the  call  comes  during  the  music,  the  music  is  muted  and  the  call  enters  the  fore-

 

X

ground. After the call ends, the music plays on.

After switching off the device during playing music, the music is paused, and after the 

 

X

device is turned on again and the pause is turned off, the music plays again. 

The inclusion of navigational application in your phone mutes the radio to broadcast navi-

 

X

gation instructions through the speakers. However the conversation has the highest prior-
ity, so that while an incoming call only conversation will be heard through the speakers.

Содержание CC 9048






















Отзывы: