17
Tip:
You can only stop the music play back via your smartphone.
X
In the event of incoming and outgoing calls, the music play back will be automatically
X
interrupted.
Ensure that your mobile only transfers music files to the hands-free car kit via A2DP.
X
Optimum playback quality can only be guaranteed if this is the case.
If you press the call button on the CC 9048, the device says:
Enter voicetag
. Some smartphones may
then release a signal sound after one to three seconds. Only then can you enter the voicetag.
Outgoing call
Briefly press down on the call button to activate the voicetag function. The device says:
Enter voice-
tag
. Begin the call with a voicetag. If the number dialled is busy, you can begin to redial. To do so, hold
down the call button (for two seconds). The device says:
Redial
.
If you announce a non-saved voicetag then the device says:
Voicetag is not available
. CC 9048 re-
turns to standby mode.
Briefly press down on the end call button to end the voicetag function, the active call or the redialling.
If you make a call and briefly press down on the call button, the private mode is then started. The call
is then forwarded to the mobile phone.
Incoming call
The backlight to the sensor keys is activated. In addition to this, a ring tone sounds which alerts to an
incoming call. If the mobile phone transfers its own ring tone to the hands-free car kit (depending on
the mobile phone), then this will sound. If the caller has hidden their number, then the device says:
Unknown caller
.
Briefly press down on the end call button to refuse the call. The device returns to standby mode.
Briefly press down on the call button to accept the incoming call.
