10
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
i
When purchasing pellets, ask
for conformity declaration and
certificate issued by an accredited
laboratory and make sure the
fuel meets the requirements
indicated in the manual. If
you purchase large amount of
pellets (bulk supply for the entire
heating season for example), ask
your supplier to provide accurate
and true information about the
storage conditions.
We recommend to use pellets with size of
6 - 8 mm. Density 600 - 750 kg/m
3
heating
value 4.7-5.5 kWh/kg. Ash content – less
than 1% and moisture content up to 8%.,
EN 14961-2:2011.
The optimal density of the pellets which
guarantees their quality is 605-700 kg per
cubic meter.
Pellet moisture content must not exceed
10%. Make sure you store your fuel in a
dry and well-ventilated place.
The optimal pellet ash content is ≤ 1%.
This also provides for less frequent
cleaning intervals for the burner.
The table below contains the parameters
which we recommend that you take into
consideration when choosing fuel for your
Pell burner.