BURNiT Lambda series, Инструкция по установке и эксплуатации

Страница: 10 / 36

TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
10
7.2. Connecting the boiler to the mains
power supply.
*
Such connection must be
performed by a technician /
service shop authorized for such
operations.
+
Caution! ELECTRIC SHOCK
HAZARD!
- Before opening the unit: switch
off the voltage and secure the
unit against accidental restart.
- Observe installation instructions.
Diagram 5.
Connection of the controller with power supply and peripheral equipment.
Socket X61 - used to connect the display
to the controller.
Next photo shows how to connect the
mains power supply to the controller.
Socket is labeled X1 .
yellow-green
blue
brown
Socket X59 is for the power supply cable
of the primary air intake actuator. Socket
X60 is for the power supply cable of the
secondary air intake actuator.
yellow-green
blue
brown
Socket X44 serves to connect the open
door sensor.