G
EBRAUCHSANWEISUNG
P
FLEGEBETT
DALI 24 V
OLT
· I
NSTRUCTION
M
ANUAL FOR
N
URSING
B
ED
DALI 24 V
OLT
62
Problem
Possible causes
Solution
Hand switch / drive system
not functioning
Hand switch plug not properly
connected
Transformer plug (24 volt) not
properly connected
Hand switch or drive system
defective
Functions are blocked on
hand switch
)
Test the plug connection
)
Plug the transformer plug into
the connection socket
)
Inform your operator about
necessary repairs
)
Unlock functions (see page 30)
Green LED on transformer
not lit and drive systems
are without function
Power cable not properly con-
nected
Wall socket without power
Transformer defective
)
Plug in the power cable
properly
)
Test the wall socket and fuse
box
)
Exchange the transformer;
inform your operator about neces-
sary repairs
Green LED on transformer
lit continuously, yellow
LED not lit when any hand
switch button is pushed
Hand switch is defective
Transformer plug (24 volt) not
properly connected
Functions are locked on hand
switch
)
Exchange the hand switch
)
Test the plug connection
)
Unlock the functions
(see page 30)
Drives operate in one
direction only
Hand switch or drive system
is defective
)
Inform your operator about
necessary repairs
Drives stop suddenly after
prolonged adjustment
times
Heat switch in transformer
has been activated
)
Pay attention minimum pause
(see page 29)
)
Exchange the transformer;
inform your operator about neces-
sary repairs
Trouble-shooting table aid
