Burley BR5120-1, Руководство пользователя

Страница: 8 / 11

Mounting/changing the sand paper
With fast hook and quick release system.
2.1 Position the sand paper and press by hand.
2.2 Press on the sand paper by giving it a short, firm push against the flat surface of
sanding plate and switch on the power tool.
− This ensures good adhesion and prevents premature wear.
2.3 If the point has become worn, pull off the sand paper, turn it through 120º and
place it on again, or change the sanding paper.
Mounting dust extraction
Take the dust adaptor and screw it on the bottom part of the machine. Keep in mind
that the screw has to be on the bottom part of the dust adaptor, this way you can
screw it nice and gently in the screw hole. After this piece is mounted on the
machine, you can attach the dust pipe on the dust adaptor. Give the pipe a firm
push. You can always adjust the direction of the pipe by moving it a bit in the desired
direction.
OPERATION
Assemble & Release Battery Pack
1.1 Assemble the fully charged battery pack as Fig.1.
1.2 Push down button 7and then pull out the battery pack from the main body of
the machine.