background image

         WARNING! Read all safety warnings and all instructions. Failure to follow the 
warnings and instructions may result in electric shock, fire and/or serious injury. 
Save all warnings and instructions for future reference. The term “power tool” in the 
warnings refers to your mainsoperated (corded) power tool or battery-operated 
(cordless) power tool.

SAFETY

GENERAL SAFETY INSTRUCTIONS

1.WORK AREA SAFETY

> Keep work area clean and well lit. Cluttered or dark areas invite accidents.
> Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.

> Keep children and bystanders away while operating a power tool. Distractions can

cause you to lose control.

2.ELECTRICAL SAFETY

> Power tool plugs must match the outlet. Never modify the plug in any way. Do not

use any adapter plugs with earthed (grounded) power tools.Unmodified plugs and
matching outlets will reduce risk of electric shock.

> Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.

> Do not expose power tools to rain or wet conditions.Water entering a power tool

will increase the risk of electric shock.

> Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.

> When operating a power tool outdoors, use an extension cord suitable for outdoor

use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

> If operating a power tool in a damp location is unavoidable, use an earth leakage

circuit breaker. Use of an earth leakage circuit breaker reduces the risk of electric
shock.

3.PERSONAL SAFETY

> Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power
tools may result in serious personal injury.

02

Содержание BR5120-1












Отзывы: