Burley BR5120-1, Руководство пользователя

Страница: 10 / 11

Sanding
The removal rate and the sanding pattern are primarily determined by the choice of
sanding sheet, the pre-set oscillation rate and the applied pressure.
Only flawless sanding sheets achieve good sanding capacity and extend the
service life of the machine.
Pay attention to apply uniform sanding pressure; this increases the working life of
the sanding sheets.
Intensifying the sanding pressure does not lead to an increase of the sanding
capacity, but to increased wear of the machine and the sanding sheet.
For precise on-the-spot sanding of edges, corners and hard to reach areas, it is
also possible to work with the finger sanding pad.
When selectively sanding on the spot, the sanding sheet can heat up considerably.
Reduce the orbital stroke rate and allow the sanding sheet to cool down regularly.
A sanding sheet that has been used for metal should not be used for other
materials.
Scraping
For scraping, select a high oscillation rate.
Work on a soft surface (e.g. wood) at a flat angle and apply only light pressure.
Otherwise the scraper can cut into the surface.
MAINTENANCE / SERVICE
▪ Keep the ventilation slots of the machine clean to prevent overheating of the
engine.
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ Keep the ventilation slots free from dust and dirt.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
▪ Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents
may damage the plastic parts.
ENVIRONMENT
Should your appliance need replacement after extended use, do not dispose of it
with the household refuse, but in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal
household rubbish. Please recycle where recycle facilities exist. Check with your
Local Authority or retailer for recycling advice.