Burley BR5120-1, Руководство пользователя

Страница: 7 / 11

> The green light will continue to blink, but a red indicator light will be lighting-off
during this operation. Once the battery pack has reached an appropriate
temperature, the red light will turn on and blink slowly . The charger will resume
the charging procedure after the red light is turned off.
06
Charge Indicators
The compatible charger(s) will not charge a faulty battery pack. The charger will
indicate faulty battery by illuminating the red light and blinking quickly.
NOTE: This could also mean a problem with a charger.
If the charger indicates a problem, take the charger and battery pack to be tested
at an authorised service centre.
ASSEMBLY
Mounting sanding plate/ saw blade/ spatula
Take care with sharp tools such as spatulas, saw blades or cutting blades
1.1 Loosen the quick release clamp (6) by pulling the quick-release lever (1)
completely open.
1.2 Spin the quick release lever anti-clock wise until the clamping plate is lose.
1.3 Put the quick-install saw blade, sanding plate or spatula toward the output
spindle which is situated between the cover clamp (8) and quick release clamp
(6). Push the accessory in and place it firmly onto the locating pins (7). Pay
attention that the clamping plate is placed well into the holder of the machine,
otherwise you cannot spin the quick release lever.
1.4 Fasten using the quick-release lever (1), spin it in a clockwise direction to
fasten the clamping plate and accessory.
1.5 Check if the quick release lever is tightened enough.
1.6 Pull the quick release lever down and spin it until it is right above the holder.
1.7 Push the quick release lever into the holder.
1.8 Remove the accessory in the opposite way.
WARNING: This tool is equipped with quick-install accessories
during operating; do not use any unmatched accessories.