manualshive.com logo in svg

Burkert 8756 BATCH, Руководство по эксплуатации

Поделиться
Скачать
Burkert 8756 BATCH Скачать руководство пользователя страница 24

Type 8756 BATCH

Electrical connection

24

6

ELECTRICAL CONNECTION

6.1

Safety instructions

DANGER!

Risk of injury from electric shocks.

▶

Before working on the installation or product, switch off the power supply. Make sure that nobody can
switch the power supply on.

▶

Observe all applicable accident protection and all applicable safety regulations for electrical equipment.

WARNING!

Risk of ignition and risk of fire that are due to electrostatic discharge.

An electrostatic discharge of the product can ignite combustible gas vapours.

▶

To avoid a build up of electrostatic charge, connect the housing to the functional earth (FE). Use a
green-and-yellow cable that is as short as possible. And the cable cross-section must be at least equal
to the cross section of the power-supply cable.

WARNING!

Risk of injury from electromagnetic fields.

If the functional earth (FE) is not attached, then the requirements of the EMC directive are not met.

▶

Connect the housing to the functional earth (FE). Use a greenand- yellow cable that is as short as pos-
sible. And the cable cross-section must be at least equal to the cross section of the power-supply cable.

ATTENTION!

Requirements for the proper function of the product.

▶

Use a power supply unit with sufficient power.

6.2

Additional documentation

▪

For more information on büS, read the cabling guide that is available at 

country.burkert.com

.

▪

For more information on CANopen that is related to the product, refer to the Operating Instructions
"CANopen Network configuration" at 

country.burkert.com

.

▪

Product description file and object description for the related product Type (download from

country.burkert.com

).

▪

Product-specific help in the Bürkert Communicator software.

▪

büS-driver for LabVIEW on request.

6.3

Wire the product variant büS /CANopen

6.3.1

With büS extension cables from Bürkert

Requirements for the correct operation of the product.

▶

Refer to the cabling guide that is available in English and German at 

country.burkert.com

.

To wire the product, you can use büS extension cables from Bürkert. Refer to following table.

Содержание 8756 BATCH





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды