Type 8756 BATCH
Technical data
16
4
TECHNICAL DATA
4.1
Conformity
The product complies with the EU directives according to the EU declaration of conformity (if applicable).
The applied standards, which verify conformity with the EU directives, can be found on the EU type examin-
ation certificate and/or the EU declaration of conformity (if applicable).
4.2
Operating conditions
WARNING!
Risk of injury caused by pressure, fluid escape.
▶
Do not exceed the maximum operating pressure. The value of the operating pressure is given in the
product data sheet.
CAUTION!
Risk of injury from malfunction that is due to outdoor use.
▶
Do not use the product in outdoor areas.
4.2.1
Mass Flow Controller with on/off valve Type 6013
Ambient temperature
0 °C...+55 °C
Fluid temperature
–10 °C...+60 °C, only in liquid state
Ambient humidity
< 95%, non-condensing
IP-Code according to EN
60529
IP65
3
If the following conditions are met:
▪
Cables must be connected.
▪
Mating connectors must be plugged in and tightened.
Operating pressure
▪
Inlet pressure
▪
max. 16 bar
Tab. 2: Operating conditions
4.2.2
Mass Flow Controller with on/off valve Type 6724
Ambient temperature
0 °C...+50 °C
Fluid temperature
–10 °C...+50 °C, only in liquid state
Ambient humidity
< 95%, non-condensing
IP-Code according to EN
60529
IP40
4
If the following conditions are met:
▪
Cables must be connected.
▪
Mating connectors must be plugged in and tightened.
3
The IP-Code is determined by Bürkert. The IP-Code is not evaluated by UL.
4
The IP-Code is determined by Bürkert. The IP-Code is not evaluated by UL.
