Burkert 8696 REV.2, Быстрый старт

Страница: 22 / 30

22
Control and display elements
11 CONTROL AND DISPLAY ELEMENTS
A detailed description of the operation and functions of
the positioner and the communication software can be
found in the respective operating instructions.
ATTENTION!
Breakage of the pneumatic connection pieces due to rota-
tional impact.
▶
When unscrewing and screwing in the transparent cap, do not
hold the actuator of the process valve but the basic housing.
Body casing
Basic housing
Actuator
Transparent cap
Fig. 16: Open positioner
→
Screw off the transparent cap of the positioner to operate the
buttons.
Button
2
Button
1
Status LED
Communications
interface
Cutoff LED
Manual LED
Charact LED
Fig. 17: Description of the control elements
ATTENTION!
Breakage of the pneumatic connection pieces due to rota-
tional impact.
▶
When unscrewing and screwing in the transparent cap, do not
hold the actuator of the process valve but the basic housing.
Damage or malfunction due to penetration of dirt and
humidity.
▶
To observe degree of protection IP65 / IP67, screw the trans-
parent cap in all the way.
→
Close the device (assembly tool: 674078
9)
).
9) Theassemblytool(674078)isavailablefromyourBürkertsalesoffice.
english
Type 8696 REV.2