Burkert 8696 REV.2, Быстрый старт

Страница: 12 / 30

12
Installation
6.8.3 Electrical data, büS
Protection class III as per DIN EN 61140
(VDE 0140-1)
Connection Circular plug-in connector M12 x 1,
5-pin, A-coded
Operating voltage 24 V DC ±25 %
Current consumption max. 150 mA
Total power consumption max. 3.5 W
6.9 Factory settings
Function Parameter Value
CUTOFF Sealing function below
Sealing function above
2 %
98 %
CHARACT Characteristic correction FREE
3)
DIR.CMD Reversal of the effective direction
set-point value
Off
Tab. 2: Factory settings
Additional functions are described in the operating
instructions Type 8696 REV.2.
These instructions can be found on the Internet at
www.burkert.com .
4) Without change to the settings via the communications software a
linear characteristic is stored in FREE.
7 INSTALLATION
Only for positioner without pre-assembled process valve.
7.1 Safety instructions
DANGER!
Risk of injury from high pressure in the equipment/device.
▶
Before working on equipment or device, switch off the pressure
and deaerate/drain lines.
Risk of electric shock.
▶
Before working on equipment or device, switch off the power
supply and secure to prevent reactivation.
▶
Observe applicable accident prevention and safety regulations
for electrical equipment.
WARNING!
Risk of injury from improper installation.
▶
Installation may be carried out by authorized technicians
only and with the appropriate tools.
Risk of injury from unintentional activation of the system and
an uncontrolled restart.
▶
Secure system from unintentional activation.
▶
Following assembly, ensure a controlled restart.
english
Type 8696 REV.2