Burkert 8696 REV.2, Быстрый старт

Страница: 20 / 30

20
Start-up
10.3.1 Connecting IO-Link device with Bürkert
Communicator
Required components:
•
Communications software: Bürkert Communicator for PC
•
USB-büS interface set (see accessories)
•
büS adapter for communication interface (see accessories)
•
If necessary, a büS cable extension (see accessories)
ATTENTION
Breakage of the pneumatic connection pieces due to rota-
tional impact.
▶
When opening or closing the device, do not press against the
actuator, but against the basic housing.
→ Screw off the transparent cap by turning counterclockwise.
Body casing
Basic housing
Actuator
Transparent cap
Fig. 14: Open positioner
Button
2
Button
1
Status LED
Communications
interface
Cutoff LED
Manual LED
Charact LED
Fig. 15: Communications interface
→
Insert micro USB plug in communication interface.
→ Establish connection to PC with USB-büS interface set.
→ Starting Bürkert Communicator.
→
Implementing settings.
10.3.2 Connecting büS device with Bürkert
Communicator
Required components:
•
Communications software: Bürkert Communicator for PC
•
büS standard set (see accessories)
→
Establish connection to PC with USB-büS interface set.
→
Starting Bürkert Communicator.
→ Implementing settings.
english
Type 8696 REV.2