Burkert 8285, Инструкция по эксплуатации

Страница: 58 / 288

58
8285
Menu Display Parameter sets
Contact K3 (Administrator)
Abort
24.8 °C
Contact type
OK
NAMUR maintenance
Usage
ON delay
NAMUR function check
Limit
Rinse contact
Parameter set B active
USP output
7.00pH
OFF delay
24.8 °C
Left softkey
7.00pH
Return Connect
Function control matrix (Administrator)
Input OK2
Right softkey
Profibus DO 2
ParSet KI rec. Fav Unical
– –
–
–
–
–
Switching parameter sets via OK2
Parameter setting / System control / Function control matrix
Note:
Function check active
Parameter sets
2 complete parameter sets (A, B) can be stored in the analyzer.
You can switch between the parameter sets using the OK2 input.
The currently activated set can be signaled by a relay contact. An icon in the
measurement display shows which parameter set is active:
or
Signal active parameter set
via relay contact
Call up parameter setting
Module BASE
Select contact
Usage: “Parameter set ...”. •
•
•
•
Select parameter set (A, B) via
input OK2
Call up parameter setting
System control
Function control matrix
Select “OK2”
Connect “Parameter set A/B” •
•
•
•
•
Note
The selection has no effect when working on SmartMedia card with
SW 8285-102.