Burkert 8285, Инструкция по эксплуатации

Страница: 57 / 288

57
Menu Display Setting the OK inputs
Inputs OK1, OK2 (Administrator)
19.2°C
Return
OK2 usage
7.00 pH
OK1 usage
Off
Function check
For OK2 usage see
“Function control matrix”
Inputs OK1, OK2 (Administrator)
19.2°C
Return
OK1 usage
7.00 pH
Input OK1
active 10 ... 30 V
active < 2 V
For OK2 usage see
“Function control matrix”
Function check
Input OK2
OK
OK1, OK2 inputs: Specify level
Parameter setting/Module BASE/Inputs OK1, OK2
Note:
Function check active
Stromausgang parametrieren
• Parametrierung aufrufen
• Paßzahl eingeben
• Modul BASE wählen
• “Augangsstrom I1” auswählen
OK1 usage
Call up parameter setting
Enter passcode
Select “Module BASE“
Select “Inputs OK1/OK2”
Select “OK1 usage” •
•
•
•
•
Stromausgang parametrieren
• Parametrierung aufrufen
• Paßzahl eingeben
• Modul BASE wählen
• “Augangsstrom I1” auswählen
OK1/OK2 switching level
Call up parameter setting
Enter passcode
Select “Module BASE“
Select “Inputs OK1/OK2”
Specify active switching level •
•
•
•
•
The BASE module provides 2 digital inputs
(OK1, OK2). The following functions
(depending on the parameter setting) can
be started via a control signal:
OK1: “Off” or “Function check”
OK2: Select: System control / Function
control matrix. (“Off”, “Parameter set A/B”,
“Start KI recorder”)
The switching level for the control signal
must be specified:
(active 10...30 V or active < 2 V).
•
•
BASE module
OK1
OK2
OK1
OK2
OK