Copyright 2020 Burger King Corporation. All Rights Reserved.
Cable Management
After all the units are completely installed, ensure the cabling has been professionally managed.
•
Under the Front Counter
–
Make sure all the excess cabling is neatly gathered and secured,
so that it is not sitting on the ground
•
WARNING!!
–
if using screws to secure zip ties to the counter, DO NOT use any screws
longer than 1/2”. Don’t
make the mistake of damaging the counter!
•
In the Drive Thru
–
Make sure there is enough slack in the cable to present the terminal to
the customer, but not so the cable is laying on the ground
•
Front Counter
–
Ensure the cable running from the terminal is following the path of the
POS/Printer cables. Make sure the front counter is uniformed
3.
Kiosk (For other models please see Zivelo guide)
Tool List:
To complete the physical installation some tools will be needed. A straight swap of Pinpads
–
leveraging existing cables
•
Allen key Set
–
removing screws on bracket
•
Supplied keys
–
Opening main door
Note: New cables can be kept as spares
Procedure
1.
Open the Main Door
a.
To open the main door, locate the lock. Using supplied keys, unlock by inserting the
key and turning
b.
Screen will come forward when the door opens
