Copyright 2020 Burger King Corporation. All Rights Reserved.
Installing the Front Counter Mounts
Note: You can install the stands taking one of two approaches. The First approach is to leave the
base intact to the counter and unscrew the upper plate. The new P400 stands use the same base as
the VX820. Using the upper plate of the P400 stand you will be able to screw it into the VX stand
base.
The Second approach is to remove the VX stand and replace with the P400 stand. Note the Pinpad
stands were initially installed using industrial grade tape. The new stands use the same adhesive
When removing the existing stand, please be careful of inflicting any damage on the counter. Begin
by laying out the placement of the device. The Front Counter Pinpad Device will be mounted on the
counter facing the Customer; in a way as to not impeded tray passing, or access by Crew Members.
The Installation location should be exactly where the previous mount was installed.
In the event the stand needs to be placed in another location than the original front counter
stand, it is extremely important that the stand is not placed more than 4 inches from the lip of the
counter (Customer side) to adhere to ADA requirements
A.
Screw the Verifone on to the mount using a #1 Philips screwdriver
B.
In the mount kit is also a cable management clip to provide strain relief to the device
C.
Install the circular, black, plastic cover into the top of the mount base
D.
Prep the counter by using the supplied alcohol wipe to clean section of the counter
E.
Attach the Counter Mount to the counter using the provided double-sided adhesive
F.
The bracket should be 4 inches off the custome
r’s side of the counter, on the LEFT side of
the POS terminal
G.
Apply pressure to the mount for at least 10 seconds before releasing
H.
Create a uniform appearance across all devices and cable manage all devices in the same
manner
I.
If the cable runs to the left, they all must run to the left. If Cable runs to the right, they all
should run to the right.
Creating a Uniform look is not only professional but causes the customer’s eyes not to be
drawn to the visible cables.
