Copyright 2020 Burger King Corporation. All Rights Reserved.
Post-requisites:
1.
Pair Device to each POS terminal starting at Drive Thru and continuing to Front Counter
2.
Run a Test Transaction and Take a Picture of each terminal showing successful test
transaction. Test Credit card (all types if possible) and Gift card
3.
Box all VX820 devices and use the VF label provided to ship back devices
Note: In order to receive and not lose the VF discounts, all VX terminals must be returned &
shipped back within 30days of conversion
What is needed:
Prior to performing the conversion of Pinpads you should make sure you have all necessary
components delivered. Also, you should have the correct tools to complete the installation.
Pinpad package:
When validating the shipment against the order the following components at minimum should
be included per Pinpad to complete your installation.
•
Pinpad terminal (staged at Verifone (VF)
•
VF cable Hub (Note: Drive Thru cable consist of 2 parts -it is a snap-off cable)
•
A power supply that plugs into the VF cable hub
•
Cat5 Patch cable (If needed)
•
Pinpad Stands (DT is a wall mount)
•
A Kiosk adaptor plate (If you have kiosks)
Tool List:
To complete the physical installation some tools will be needed depending on your approach.
Approach #1 A straight swap of Pinpads
–
leveraging existing cables and replacing stands
•
A printed copy of this document
•
#1 Phillips Head Screwdriver (precision, mini tip)
•
Flat head screwdriver
Note: New cables can be kept as spares, if you experience future cable break
Approach #2 Swap of devices, stands, and cables
•
A printed copy of this document
•
#1 Philips Head Screwdriver (precision, mini tip)
•
#2 Philips Head Screwdriver
•
Flat Head Screwdrivers
•
Standard/Metric Allen Wrenches
•
Wire Cutters
•
Cordless Drill w/ assorted bits
•
Electrical Tape
