Burford 2200M, Руководство пользователя

Страница: 79 / 214

Settings and Adjustments 77
Adjusting The Tie Tightness
There are two adjustments on the Model 2200M and 2300M Tyers to adjust the tie
tightness. One adjustment is the ribbon guide position and the other is the upper belt
pulley position.
To correctly adjust these it is important to understand how this area of the Tyer works.
The bag neck is gathered into an area called the “tie window”. The tie window is shaped
like a triangle. The triangle sides are outlined by the lower belt, upper belt and ribbon wire.
By increasing or decreasing the size of the tie window, the tension around the bag neck
can be determined. If the tie around the bag neck is loose, the window area should be
decreased. If the tie around the bag neck is so tight as to cause tears or holes in the bag
neck, the window area should be increased. The window may also need to be adjusted
when changing bag size or bag thickness.
Bag tail presentation from the discharge of the bagger must be flat and
not folded over. If this is not achievable, contact your Bagger
manufacturer for assistance.
Cover removed for clarity of component location.
Tie Wondow