Burford 2200M, Руководство пользователя, Страница: 73 / 214

Settings and Adjustments 71
Ribbon Dispenser Adjustment
Release all spring tension from the ribbon assembly by
loosening thumb screw and sliding the cantilevered
spring stop to relieve spring tension. Set brake tension to
1.5 lbs. by using a pull meter or similar method to
measure force to pull ribbon from spool. To
increase/decrease the brake tension slide the spring stop
until correct tension is reached. Position thumb screw
next to spring stop and securely tighten
Dancer Arm Adjustment
Position dancer arm such that it is aligned with the corner of the main plate (as shown at
right). Loosen “V” belt clamp, for ribbon spool assembly, and adjust “V” belt until the
release point is as shown in the pictures below.
Dancer Arm
(release point)
Spring stop
Thumb screw
V-belt clamp
Roller must make contact
with release arm when
dancer arm is at release
point.
Spool of Ribbon must be mounted to adjust
brake tension.