8
Bean Hopper Setup
(continued)
4. Install the Bean Hopper into the machine as
shown. Some minor movement may be required
to settle the hopper into its proper seating.
6. Insert Hopper Lid Key into key hole located on
the left side of the Bean Hopper Lid as shown.
Once the lid is unlocked, lift the lid, and you have
access to each of the three bean compartments.
NOTE: At this point, go ahead and fill each of the
hoppers with the beans that make up your
unique recipes. Close the lids, and then close
and lock the main hopper lid.
5. Lock the Bean Hopper into place by pushing the
hopper lock mechanism (Red Ball) to the left as
shown. Doing this will slide a metal tang into a
slot, thus preventing the bean hopper from
being removed as well as allowing the beans to
flow from the hoppers when the bean augers are
engaged. Failure to do so may result in improper
machine performance or damage to the hopper.
Metal Tang
INITIAL SETUP
4
5
6
continued >
