Bunn Single TF DBC, Инструкция по установке и эксплуатации

Страница: 126 / 172

Page 36
FACTORY DEFAULTS
This function allows the operator to erase all of the
previously entered recipes and ad messages. Factory-
set default values will replace
all previous settings.
Procedure to set factory defaults:
1. Press and hold the ® pad until SET NEW RECIPES
appears. Release the ® pad. Press and release ®
until the display reads
FACTORY DEFAULTS .
2. Pressing NO in this screen will revert to the MAIN
SCREEN . Press YES to replace the defaults. This
advances to WILL REPLACE ALL BREWING SET-
TINGS . This screen will alternate with ARE YOU
SURE? .
3. Pressing NO in the confirmation screen will revert
to MAIN SCREEN , without resetting the brewing
setups to the defaults. Press YES to load the
defaults. This will then revert to the MAIN SCREEN ,
and the factory default values will replace all
previously entered values. It will NOT reset the
summation Brew counter.
P2312
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
FACTORY DEFAULT VALUES
Brew Lockout YES
BREW VOLUMES:
Small Batch
64 oz.
Medium Batch 128 oz.
Large Batch 192 oz.
BYPASS PERCENTAGE:
Small Batch
0%
Medium Batch 0%
Large Batch 20%
PULSE BREW TIMES:
Small Batch :20 (1st on)- :15 (off)- :05 (last on)
Medium Batch 1:00 (1st on)- :10 (off)- :20 (last on)
Large Batch :40 (1st on)- :15 (off)- :20 (last on)
PREINFUSION TIMES:
Small Batch
DISABLED
Medium Batch DISABLED
Large Batch DISABLED
DRIP OUT TIMES:
Small Batch
1:00
Medium Batch 1:30
Large Batch 2:00
ENABLE ADS YES
BREW TEMPERATURE 205˚F (96˚C)
READY TEMPERATURE 195˚F (91˚C)
REFILL 0 - 155
SPRAY (OZ/MINUTE) 53
BYPASS (OZ/MINUTE) 48
FUNNEL DETECT YES
35058 121102