ccd_manual_e
Page 35 /36
3-Flute router
Solid carbide cutter, 3 flutes, right hand
cut, right hand spiral flute, shank diameter
1/8”(3,175 mm), total length 1 1/2” (38
mm), fish-tail-point
Contour router for all common PCB materi-
als. Especially suited for:
Low vibration cutting of metal boards, e.g.
copper heat sheets
Diamond patterned router
Solid carbide contour router, diamond cut,
main cutting edge, shank diameter
1/8”(3,175 mm), total length 1 1/2” (38
mm), „G”-point Standard, special points
possible.
Standard contour router for routing inner
and outer contours of single, double and
multilayer boards.
Contour finishing router
Burr-free cutting of Galvanic connectors
(gold fingers) and metal surfaces
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]