Bungard CCD Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 36

Bungard CCD Скачать руководство пользователя страница 16

ccd_manual_e

Page 16 /36

The   machine   is   delivered   with   a   dongle   for   the   cover
switch. If the dongle is not inserted into the socket on
the   controller   (CCD/2:   connection   box),   the   machine
does   not   move.   In  the  dongle   there   are  2  connectors
bridged. If a hood is subsequently to be connected with
the cover switch, then the dongle must be opened, the
bridge must be removed and the cables from the door
switch connected to the "bridge contacts".

CCD/2 and CCD/2/Eco:

the machine has a

separate power supply. Please connect the
power   cable,   the   connecting   cable   to   the
machine   and   the   vacuum   cleaner.   An
adapter   from   Schuko   to   a   cold   plug   is
included.

On the left-hand side of the machine are
the USB connection from the machine to the PC and the plug for the power supply.
Now please insert the spindle into the spindle holder and connect the connection cable.

Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany

Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]

«
...
14
15
16
17
18
...
»

Содержание CCD





































Отзывы:

Нет отзывов