CCD-Premium
Operating manual
page 17 /24
The standard RoutePro3000 is for free, but after a trial time of 14 days, you need to fill out a re-
gister form. The registration process is described in the help file. Please note: from 2014 on you
do not need to apply for a license anymore. After filling out the registration form you can directly
work. With internet connection and without. In addition you have the chance to create error re-
ports, which help us to help you either to directly solve your problem or to get information where a
bug fix may be required.
After successful registration you can test all available modules for a trial period of 14 days.
To test the modules, please go to
options
and wait till your desired modules shows up at the field
available modules.
Click on your desired module. After that you can activate your test license. It
may be necessary to restart RoutePro3000.
After 14 days a license has to be acquired. Please note that special hardware needs to be ob-
tained for the modules (laser head, camera, etc.). To apply for a license, you need to have a Com-
puter with internet connection. If you do not have an internet connection, please contact us to ap-
ply for an offline license. We will show you how it is done.
If you have a new machine the CD coming with the
machine is already adapted to your specific machine.
No further action beyond registration and activating li-
censes need to be done. Still we recommend to com-
pare the machine parameters at
options
–
machine
with the PDF print out coming with the machine.
If you update from RoutePro2008 to Route
Pro3000,
you need to establish the correct parameters for your
machine. Process like this: Start RoutePro3000 and go
to options and machine. Hoover over the CCD-picture
and insert correct parameters for XYZ-motors, spindle,
tool slots, sensor and table. You can copy the values
from your RoutePro.ini-file of your older Software
RoutePro2008. Alternatively you can print screenshots
from your RoutePro2008 software and copy the values
from the screenshots.
Note: there is one exception concerning the Z-position
of the tool slots. In RoutePro2008 the z-position of the tool slots was 0.5 – 1 mm less than z-max.
E.g. if z-max was 37.65, then z-position of the tool slots was approx. 37.00mm. In RoutePro3000
the table is the 0-Position of the z-axis and you almost put the tool to 0. So now you have to insert
0.5 – 1.0 mm in the ATC-tool position table.
Now your Software RoutePro3000 is ready to
use.
Have fun with your CCD and the new software
Routero3000!
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/5036, Fax: +49 (0) 2292/6175, E-mail: [email protected]