Bull ESCALA 7214, Руководство по обслуживанию

Страница: 65 / 70

Note: Use an analog meter to measure grounding resistance; do not use a
digital multimeter.
14. If the 7214 Storage Enclosure passes the test in the previous step, plug its
external power cable into the electrical outlet. If the 7214 Storage Enclosure
does not pass the test, see Chapter 2, “Maintenance Analysis Procedures for
Service Representatives,” on page 7 for more information. If problems persist,
contact your service representative.
Note: The Safety Information Label located on top of the power supply under the
top cover, shows the following symbol:
This symbol indicates a hazard arising from dangerous voltage inside. Do not
open.
RLHSV515-0
Figure 21. Rear View of the 7214 Storage Enclosure
A38M
0
010
Appendix B. Safety Inspection Procedures
49