Bull ESCALA 7214, Руководство по обслуживанию

Страница: 37 / 70

DANGER
To prevent a possible electrical shock when installing the device, ensure that
the power cord for that device is unplugged before installing signal cables.
(RSFTD204)
4. Unplug the 7214 Storage Enclosure power cable from the electrical outlet.
5.
Disconnect the power cable from the 7214 Storage Enclosure.
6. Disconnect the SAS (signal) cable from the 7214 Storage Enclosure.
7.
Place the 7214 Storage Enclosure on a flat work surface.
8. Remove the three screws on the back
1
(using a T-10 torx driver) that secure
the top cover of the enclosure to the chassis. Slide the cover to the rear and
then lift back and away to remove it. Set the cover and screws aside for
replacement later.
To install the cover, reverse this procedure.
RLHSV502-0
1
Figure 7. Removing the Cover Screws
Chapter 3. Removal and Replacement
21