Bull ESCALA 7214, Руководство по обслуживанию

Страница: 33 / 70

v
SATA DVD-ROM Drive
If the status of the 7214 Storage Enclosure drive feature is displayed as
Available, the device has successfully been configured. If the status is not
displayed as Available, refer to your host system manuals.
Is the 7214 Storage Enclosure properly configured to the host system?
NO Go to Step 19.
YES Go to Step 19 to verify that the problem is fixed
Step 19
This step runs the AIX diagnostics to determine the problem or to verify a fix.
1. Press the power switch to turn on the power.
2.
Press the load/unload button to eject any media currently loaded in the
devices.
3. Obtain the appropriate test media for the device. Inspect the test media for
damage and debris. If the quality of the test media is questionable, replace it
with new test media.
4. Load the test media into the drive.
Note: For the preceding step, use only the test media; do not substitute with
other media.
5.
Run the diagnostics on the 7214 Storage Enclosure. For instructions, refer to
your AIX manuals.
Do all of the diagnostic routines pass?
NO Exchange the FRU isolated by the diagnostics and identified by the
service request number.
Note: If the drive is the FRU that is isolated by the diagnostics,
check that the connectors are properly seated. If the drive
has recently been replaced because of a similar problem,
contact your service personnel.
YES The problem is fixed.
This completes the MAPs for RS/6000 or pSeries host systems.
Chapter 2. Maintenance Analysis Procedures
17