Bull ESCALA 7214, Руководство по обслуживанию

Страница: 40 / 70

Removing the DAT72 Drive Assembly
1.
Push the latch (see
1
in Figure 10) towards the drive assembly.
2. Pull the DAT72 drive and latch assembly partially out of the enclosure using
the latch as a handle.
3. Grasp the DAT72 assembly
2
and pull it out of the enclosure.
4. Disconnect the SAS cable
3
by squeezing the metal release tab on the cable.
5. Place the drive assembly on an ESD protected work surface.
6. Remove the latch from the tape drive assembly.
This completes the device removal procedure. Reverse this procedure to install a
new device in the open bay.
1
2
3
RLHSV512-0
Figure 10. Removing the DAT72 Drive Assembly
24
7214 Storage Device Enclosure Service Guide