Bull ESCALA 7214, Руководство по обслуживанию

Страница: 39 / 70

Removing a DVD Assembly Tray
Attention: This procedure is intended to be performed only by an IBM
authorized service representative.
1. Push the latch (see
1
in Figure 9) towards the assembly.
2. Pull the DVD assembly partially out of the enclosure using the latch as a
handle.
3. Grasp the DVD assembly
2
and pull it out of the enclosure.
4. Disconnect the DVD cable
3
by squeezing the metal release tab on the cable.
5. Place the drive assembly on an ESD protected work surface.
6. Remove the latch from the DVD assembly.
1
2
3
RLHSV510-0
Figure 9. Removing the DVD Drive Assembly
Chapter 3. Removal and Replacement
23