Buell 2003XB9S, Руководство по обслуживанию

Страница: 298 / 588

2003 Buell XB9S: Engine 3-95
HOME
Table 3-29. Stamp Specifications
3. See Table 3-29. Outer races are identified at the factory
as shown.
NOTE
The different sizes of crankcase sets and flywheel assemblies
will not have separate part numbers. That is, a replacement
crankcase set may have a class 1, 2 or 3 pinion outer race.
Replacement flywheel assemblies will have either a class A
or B inner race.
Table 3-30. Roller Specifications
4. See Figure 3-145. Pinion bearings are identified as
shown.
Figure 3-144. Factory Outer Race Sizes
RACE ID
CLASS
NO.
STAMPED
IDENTIFICATION*
1.5646-1.5648 in.
(39.7408-39.7459 mm)
1 1
1.5648-1.5650 in.
(39.7459-39.7510 mm)
2 2
1.5650-1.5652 in.
(39.7510-39.7561 mm)
3 3
SERVICE WEAR LIMIT: 1.5672 in. (39.8069 mm)
ID
a0134x3x
Outer Race
Right Crank-
case Half
*Stamped
Class No.
Figure 3-145. Bearing Identification
ROLLER OD (*A) IDENTIFICATION*
Largest
Smallest
Red
Blue
White (Grey)
Green
A - Roller OD cannot be
measured to required
accuracy with micrometer.
Refer to color chart in
Table 3-15.
a0133x3x