Step 4
Place the leg pad with the narrow side towards the inside of the thigh and the
curve going up towards the buttocks so that the long strap is to the inside of the
thigh and the buckle is on the outside (this configuration is shown in Step 2
(Attachment #1). Use attachment #2 for the leg strap buckle connection on the
inside of the thigh).
Step 5
Connect the buckle and feed the leg strap slack through buckle until Leg Strap
is snug. Leg Straps are oversized for one size fits all.
During use, the tail end of the leg straps can
be folded and secured in the elastic keepers
attached to the leg pad.
Step 6 -
Remove the leg pad and lay it face down on a flat
surface.
Step 7-
Align the Leg Strap Retainer (H) with the web loop
facing out and insert it down through the slot in Leg Pad and
under the Leg Strap as shown.
Step 8 -
Girth hitch the Leg Strap Retainer through the slot in Leg Pad and around the Leg
Strap. Slide the elastic keepers onto the Leg Strap Retainers.
Step 9-
Arrange the Back Pad and the Leg Straps with pads as shown.
Step 10 -
Insert the webbing from the Leg
Strap Retainer (H) into the adjustment buckle
located on the Leg Strap Retainer Anchor (I)
ensuring the buckle is threaded properly
as shown.
Ergovation.Doc 11-3-08 (Rev. 8-18-17)
PN 230216
