Buckingham ERGOVATION 16906 Series Скачать руководство пользователя страница 3

 

WARNING: 

Activities involving the use of this equipment are extremely dangerous. The user of this equipment assumes 

all responsibility for their own actions. 

 

Before using this equipment the user must: 

 

  Receive training to its proper use and specifications. 

  Gain an understanding of all capabilities, uses, and (most importantly) limitations 

  Understand and assume all risks involved. 

 

Failure to comply with any of these warnings can result in serious injury or death!! 

 

Responsibility 

WARNING specific training MUST be received prior to use. 
This product must only be used by competent individuals or individuals receiving 
training under the direct supervision of a competent individual. Gaining adequate 
experience in appropriate tools and techniques and protective methods is the users

 

responsibility. The user personally assumes all damage, injury, or death that may 
occur as a direct or indirect result of incorrect use of this equipment. If the user is 
unable or unwilling to assume the responsibility and risk involved in the  
 proper use and understanding of this equipment, then this equipment shall not be 
used. 
 
 

 
Parts Layout

 

 
A)

   Long “D” piece w/ suspension  

       adjustment strap  

A1)

 Waist strap w/ quick connect buckle  

       (male end) 

B)   

Short “D” piece w/ permanently 

       attached slide bar buckle,

 

and  

       suspension adjustment strap  

B1)

 Waist strap w/ quick connect buckle  

       (female end) 

C)

   Ergonomic back pad w/ lumbar  

       pocket 

D)  

 Leg strap w/ quick connect buckle  

       (female end) 

E)

   Quick connect buckle frame (male  

       end) 

F)

   Quick connect buckle frame adjuster  

       bar 

G)

   Ergonomic non rigid leg pads 

H)   

Leg strap retainers (man rated) 

I)    

Abdominal stabilizer loop side (long) 

J

)   Abdominal stabilizer hook side (short) 

K)   

½” Lumbar support 

L)  

1” Elastic web keepers 

M)  

Suspension Bridge Assembly 

N)  

1.75” Snap elastic web keepers   

O)  

Leg strap retainer anchor  

      (permanently attached to Ergonomic  
      back pad) 

 

 

Note: Hardware may vary slightly from 
that shown.

 

 

 
 
 

Ergovation.Doc 11-3-08 (Rev. 8-18-17)

 

 

 

 

 

 

 

                                                                                             

PN 230216

 

Содержание ERGOVATION 16906 Series















Отзывы: